The Horner APG Webstore

SmartRail Ethernet Base.  SmartRail is a modular, DIN-rail mounted I/O system that is highly expandable.  Each SmartRail base can support up to 8 I/O modules.  Multiple SmartRail I/O Bases can be used - limited only by the performance requirements of the application.  SmartRail Ethernet I/O is compatible with any OCS controller with built-in Ethernet (XL6e, NX, QX, RX, RCX). Compatible with XL6e, NX221/251, QX, RX, RCX.  Features built-in unmanaged switch.  Supports up to 8 I/O modules drawing up to 1.5A @ 5Vdc.  Supports up to 256 digital and 32 analog I/O per base.  Requires Cscape 9.1, and Firmware 12.70.

• Required Power (Steady State): 550mA @ 24 VDC
• Primary Power Range: 19.2 – 28.8 VDC
• Output Power: 1500mA @ 5 VDC
• Relative Humidity: 5 to 95% Non-condensing
• Operating Temperature: -5°C to +55°C
• Storage Temperature: -40°C to +75°C
• Weight: 4 ounces
• Vibration & Shock: Per IEC1131-2
• Noise Immunity: Per IEC1131-2, IEC61000-4-2, IEC61000-4-3, IEC61000-4-4
• CE: Yes
• UL & C-UL: Ordinary Location
• Modules Supported per base: 8
• Digital I/O, max (per base): 256 (Inputs + Outputs)
• Analog I/O, max (per base) : 32 (Inputs + Outputs)
• I/O Limitations per system: 2048 Digital In, 2048 Digital Out, 512 Analog In, 512 Analog Out
• Power Supplied for I/O modules: 1500mA @ 5V DC maximum

• SmartRail Ethernet Base Manual